The 5th IEEE International Symposium on Smart Electronic Systems (iSES 2019)
The 5th IEEE International Symposium on Smart Electronic Systems (iSES 2019)
16-18 December 2019
The primary objective of IEEE-iSES (formerly IEEE-iNIS) is to provide a platform for both hardware and software researchers to interact under one umbrella for further development of smart electronic systems. Efficient and secure data sensing, storage, and processing play pivotal roles in current information age. The state-of-the-art smart electronic systems cater to the needs of efficient sensing, storage, and computing. At the same time, efficient algorithms and software used for faster analysis and retrieval of desired information are becoming increasingly important. Big data which are large, complex data sets, are now a part of the Internet world. Storing and processing needs of the enormous amount of structured and unstructured data are getting increasingly challenging. At the same time, Internet of Things (IoT) and cyber-physical systems (CPS) have been evolving with simultaneous development of hardware and software and span across everyday consumer electronics. The performance and efficiency of the present as well as the future generations of computing and information processing systems are largely dependent upon advances in both hardware and software. IEEE-iSES has been initiated as a sponsored meeting of Technical Committee on VLSI, IEEE-CS (http://www.ieee-tcvlsi.org/) that endorses a league of successful meetings including ASAP, ISVLSI, and ARITH, are now presented as “Sister Conferences”.
2. Different Tracks
1) Nanoelectronic VLSI and Sensor Systems (NVS)
Different revolutionary and evolutionary technologies in nanoscale have evolved to cater to the need of future generation computing and information processing. Some of the thrust areas in this domain include: (a) Nanotechnologies, nanowire, nanotubes and nano-sensors, (b) Molecular electronics, bio-sensors, bio-molecular and biologically-inspired computing, (c) Nanoelectronics for energy harvesting, (d) Spintronics, domain-wall, and phase-change memories, (e) Memristor and memristive systems, (f) Advanced 3D IC technologies, design techniques, and 3D packaging, (g) On-chip interconnection network design, modeling, and simulation, (h) GPU, HPC, and large-scale cloud-based computing, (i) Quantum computing, communication, and information processing, (j) Application specific circuit, system, and sensor design using nanoelectronics, (k) Chip to System design for critical applications, (l) Electronic design automation (EDA) or computer-aided design (CAD) methods covering these areas.
2) Energy-Efficient, Reliable VLSI Systems (ERS)
Consumption of energy or power dissipation has become a major issue in today’s nanoelectronic and information processing systems. Researchers are trying to address and overcome this critical bottleneck in different ways. Some of the major thrust areas are as follows: (a) Energy efficient hardware-software design and co-synthesis, (b) Energy efficient applications using field-programmable gate arrays (FPGAs), (c) Sustainability of energy efficient applications, (d) Dynamic power management, (e) Modeling, simulation, and validation, (f) Energy generation, recovery, and management systems, (g) Reliability analysis, modeling, and reliable system design, h) Low-power wearable and implantable systems, (i) Multi-core systems, Network-on-Chip, and MPSoCs, (j) Reversible Circuits and Systems, (k) Reconfigurable Systems, (l) Microfluidics and Biochips, (m) Electronic design automation (EDA) or computer-aided design (CAD) methods covering these areas.
3) Hardware/Software for Internet of Things and Consumer Electronics (IoT)
IoT envisions the development of tools, techniques, and standards to make ‘things’ more intelligent and programmable to develop more capable ‘things’ to address the necessity of human beings. It covers all types of sensors, communication protocols, computational tools, techniques, devices, processors, embedded systems, data warehousing, big data, cloud computing, server farms, grid computing etc. Topics of interests include the followings: (a) IoT architecture, (b) IoT enabling technologies, services, and applications, (c) IoT system integration, management, and standards, (d) IoT big data analytics, (e) IoT security and privacy concerns, (f) IoT at nanoscale, (g) Emerging hardware/software solutions for IoT, (h) Hardware and software solutions for smart cities, (i) IoT applications in areas of healthcare, agriculture, transport, waste management, (j) Hardware and software based systems for aerotropolis, (k) emerging nanoelectronics for smart consumer electronics covering these areas.
4) Hardware for Secure Information Processing (SIP)
Due to ever increasing demand of network and information contents, hardware capacity for storage, analytics, and processing are catching the eyes of researchers to provide efficient solution to the above. Some of the thrust areas are as follows: (a) Circuits and systems for digital rights management (DRM), watermarking, and encryption, (b) Data protection strategies and controls, (c) Mobile security and bring your own device (BYOD), (d) Medical device security, (e) Cyber security, (f) Emerging embedded solutions for security covering these areas.
5) Hardware/Software Solutions for Big Data (SBD)
Large, complex data sets that are difficult to process using traditional data processing tools and often do not fit within the available on-board memory are traditionally called big data. Big Data presents multiple challenges including privacy, analysis, search, storage, transfer, and visualization. Novel hardware and software mechanisms are needed to address these challenges, and make Big Data useful for end users. The issues in discussion include among others, performance evaluation, optimization, accessibility, and usability of new technologies, modeling and simulation of hardware and software solutions for big data, and many more. Topics of interest include, but are not limited to the following: (a) Big Data – regression, analysis, machine learning, and exploitation, (b) Graphs and networks for big data, (c) Distributed, and scalable systems for big data, (d) Application specific systems using big data, (e) Privacy, integrity, and security in big data, (f) Storage solutions for big data, (g) Search and mining techniques in big data, (h) Hardware designs for big data covering these areas.
6) Cyber Physical Systems and Social Networks (CSN)
CPS provides the efficient integration of the physical world with the information and communication technologies, to cater the needs of next generation embedded computing and information processing. Social networks are playing a dominant role in business intelligence and analytics nowadays. Special types of hardware and software are being developed to handle the enormous amount of unstructured data available via such networks. Some of the thrust areas are as follows: (a) Modeling of distributed real-time software for CPS, (b) Mobile cyber-physical systems, (c) Design challenges of CPS, (d) Data portability and management, (e) Graphs, algorithms, and Disambiguation in semantic search, (f) Special purpose architectural solution covering these areas.
|Final Version||October 9, 2019|
IEEE – iSES proceedings will be published by IEEE – CS conference publications services (CPS). Authors should submit their original unpublished work of maximum 6 pages using IEEE-CS double-column conference format-template.
Manuscripts in PDF format with author information (optional) should be submitted using the link:
Selected papers from IEEE-iSES 2018 program will be invited for submission to a special issue peer-reviewed journal.
Download CFP as PDF Click Here
|General Chairs||K.K.Mahapatra||NIT Rourkela, India|
|Srinivas Katkoori||University of South Florida, USA|
|Program Chairs||Leonel Sousa,||INESC-ID, IST, Universidade de Lisboa, Portugal|
|Saket Srivastava,||University of Lincoln, UK|
|Kailash Chandra Ray||IIT Patna, India|
|Publication Chairs||Karthikeyan Lingasubramanian||UAB-School of Engineering|
|Prabha Sundaravadivel||University of Texas at Tyler, USA|
|Web Chair||Dhruva Ghai||Oriental University, India|
|Publicity Chairs||Michael Hubner||BTU Cottbus-Senftenberg, Germany|
|Sri Hari Rao||NIT Warangal|
|M. S. Bhat||NIT Surathkal|
|Alak Majumdar||NIT Arunachal Pradesh|
|Atin Mukherjee||NIT Rourkela|
|Samit Ari||NIT Rourkela|
|Local Arrangement Chairs||Ayas kanta Swain||NIT Rourkela|
|Sougat Kar||NIT Rourkela|
|Manish Okade||NIT Rourkela|
|Special Session Chairs||M.B. Srinivas||BML Munjal University, India|
|R. B. Deshmukh||VNIT Nagpur|
|Student Research Forum Chairs||Santanu Sarkar||NIT Rourkela|
|Prasanna Mishra||IIIT Allahabad|
|Vijaya Bhadauria||MNIT, Allahabad|
|Finance Chairs||B. D. Subudhi||NIT Rourkela|
|Garima Ghai||Oriental University, India|
|Registration Chairs||S M Hiremath||NIT Rourkela|
|Jitendra kumar Das||KIIT Bhubaneshwar|
|Industry Liaison Chairs||D.P.Acharya||NIT Rourkela|
|B. D. Sahoo||NIT Rourkela|
|Women in Engineering Chairs||Sumam David||NIT Surathkal|
|Preethisudha Meher||NIT Arunachal Pradesh|
|Steering Committee Chairs||Saraju P. Mohanty||University of North Texas, USA|